Plastic Laminate TrimLineSeries™ 1030/2030

Description

Laminated plastic stiles, panels and doors have a finished thickness of 1'' (25mm). Core of panels and doors are 3-ply, 45-lb (20.4-kg) density, resin-impregnated particle board. Stiles have 3-ply, 45-lb (20.4-kg) density, resin-impregnated particle board bonded to each side of 11-gauge (3.2mm) sheet steel that serves as reinforcing core. Stiles have leveling device that is welded to the sheet-steel core and concealed by a one-piece, type-304, satin-finish stainless steel shoe that is 4'' (100mm) high. Surfaces are .050'' (1.3mm) thick, high-pressure plastic laminate with colored face sheets and matte finish. Bonding adhesives used are specially formulated to prevent delamination from moisture and heat normally existing in public washrooms. Edge trim has 18-8 S, type-304 stainless steel channel with satin finish. Edges of stiles, panels and doors are routed to allow flush fit of edge trim. Stiles, panels, and doors and headrails for overhead-braced compartments are made with anodized aluminum with satin finish. All door hardware and mounting brackets are of type-304 stainless steel with satin finish. No door hardware or mounting brackets is exposed on exterior of compartments, except on outswing doors. Threaded inserts are factory installed for securing hinges on inswing doors and furnished for outswing doors. T-nuts are factory installed for securing door latches. Theft-resistant, stainless steel pin-in-head, torx screws are furnished for door hardware and all mounting brackets. A clothes hook is furnished for each door. Hinges are adjustable to hold doors of unoccupied compartments partially open or fully closed, and allow a locked compartment to be opened from outside by lifting door to disengage latch from keeper.